注冊后可尊享會員價!?

電子郵箱

密碼

安全問題

注冊 忘記密碼?
無錫微色譜生物科技有限公司
MicroSep Biotechnology Co. LTD.
  您的當前的位置:
   技術文獻

   PAPERS

JA0052 Solid Phase Extraction Technique – Trends, Opportunities and Applications
來源:POLISH JOURNAL OF ENVIRONMENTAL STUDIES | 作者:A. ?wir-Ferenc | 發布時間: 36天前 | 168 次瀏覽 | 分享到:
Solid phase extraction (SPE) is an extraction method that uses a solid phase and a liquid phase to isolate one, or one type, of analyte from a solution. it is usually used to clean up a sample before using a chromatographic or other analytical method to quantify the amount of analyte(s) in the sample. The general procedure is to load a solution onto the SPE phase, wash away undesired components, and then wash off the desired analytes with another solvent into a collection tube. Solid-phase extractions use the same type of stationary phases as are used in liquid chromatography columns. The stationary phase is contained in a glass or plastic column above a frit or glass wool. The column might have a frit on top of the stationary phase and might also have a stopcock to control the flow of solvent through the column. Commercial SPE cartridges have 1-10 ml capacities and are discarded after use. it is usually used to clean up a sample before using a chromatographic or other analytical method to quantify the amount of analyte(s) in the sample. Solid phase extraction procedures are used not only to extract traces of organic compounds from environmental samples but also to remove the interfering components of the complex matrices in order to obtain a cleaner extract containing the analytes of interest. The SPE technique is widely applied for isolation of analytes from a liquid matrix and purified extracts. This paper is a review of the literature regarding general information about SPE technique, new trends in SPE technique and its application.
1 Introduction

Solid phase extraction is the very popular technique currently available for rapid and selective sample preparation. The versatility of SPE allows use of this technique for many purposes, such as purification, trace enrichment, desalting, derivatisation and class fractionation. The last few years have been chracterized by a wide interest in this technique and many publications describing SPE methods have been published [1]. This period is connected with the intensive development of research procedures for novel types of sorptive materials and lasted from the late 1960s until the beginning of the 1980s. The introduction of a wide spectrum of sorptive materials into analytical procedures gave a new stimulus for the development of SPE methodology [2].


.....


閱讀全文
上一篇: JA0051 The......
下一篇:
              我要留言
              在線專家為您解答